微小型制造研究所

微小型制造研究所
副高级职称(按拼音排序)

李朝将

 

      姓  名  李朝将  
      职  称 预聘副教授/特别研究员/博导/硕导
      学  院 机械与车辆学院 
      专  业 机械工程
      办公地址            
北京理工大学1号楼104室
      邮  编 100081                                                        
      办公电话
      邮  箱 mecjli@bit.edu.cn    cjli85@126.com
 
研究方向

 1) 微细特种加工工艺与装备。
     2) 精密复合加工工艺。
     3) 增材制造件的表面处理技术。
     4) 数字化脉冲电源控制技术。

    教育及工作经历:

    2012年哈尔滨工业大学博士毕业后,在清华大学从事博士后工作,2015年相继在新加坡南洋理工大学和新加坡国立大学做Research Fellow 工作。 

代表性论文及研究项目

1.Chaojiang Li, Bowei Zhang, Yong Li, Shiji Hao, Xu Cao, Guang Yang, Junsheng, Wu, Yizhong Huang*, Self-assembled Cu-Ni bimetal oxide 3D in-plane epitaxial structures for highly efficient oxygen evolution reaction. Applied Catalysis B: Environmental, 244 (2019) 56-62.
2.Chaojiang Li, Xi Xu, Yong Li*, Hao Tong, Songlin Ding*, Quancun Kong. Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy. Journal of Alloys and Compounds, 783 (2019) 95-102. 
3.X. Cao, C.J. Li, Y. Lu, B. Zhang, Y. Wu, Q. Liu, J. Wu, J. Teng, W. Yan*, Y.Z. Huang*, Catalysis of Au nano-pyramids formed across the surfaces of ordered Au nano-ring arrays, Journal of Catalysis, 377 (2019) 389–399. 
4.DongJiang Wu, F Lu, DK Zhao, GY Ma, CJ Li, J Ding, FY Niu*, Effect of doping SiC particles on cracks and pores of Al2O3–ZrO2 eutectic ceramics fabricated by directed laser deposition, Journal of Materials Science, 54, (2019), 9321–9330, 
5.SJ Hao, B. Ouyang, CJ Li, BW Zhang, JY Feng, JS Wu, M Srinivasan, and YZ Huang*, Hollow Mesoporous Co(PO3)2 @Carbon Polyhedra as High Performance Anode Materials for Lithium Ion Batteries, Journal of Physical Chemistry C , 123 (2019), 8599–8606 
6.C.J. Li, Y. Rao, B.W. Zhang, J. Wu, L. Xiao, Y.Z. Huang *, Extraordinary Catalysis Induced by Titanium Foil Cathode Plasma for Degradation of Water Pollutant, Chemosphere, 214 (2019) 341-348
7.Zhang, B.W; Li, C.J.; Yang, G.; Huang, K.; Wu, J.S.; Li, Z.; Cao, X.; Peng, D.D.; Hao, S.J.; Huang, Yizhong*. Nanostructured CuO/C hollow shell@3D copper dendrites as a highly efficient electrocatalyst for oxygen evolution reaction. ACS Applied Materials & Interfaces. 2018, 10 (28), p 23807–23812.
8.C.J. Li, B.W. Zhang, Y. Li*, H. Tong, S.L. Ding,Z.Q Wang, Self-adjusting EDM/ECM high speed drilling of film cooling holes, Journal of materials processing technology, 262 (2018) 95–103. 
9.X. Xu, C.J.Li, J. Lim, Y. Wang, A. Ong, X. Li, Erwin Peng, Jun Ding*. Hierarchical design of NiOOH@ amorphous Ni-P bilayer on a 3D mesh substrate for high efficiency oxygen evolution reaction. ACS Applied Materials & Interfaces. 2018, 10 (36), pp 30273–30282.
10.H. Willy, X.i Li, Z. Chen, T. Herng, S. Chang, C. Ong, C. Li, J. Ding*. Model of laser energy absorption adjusted to optical measurements with effective use in finite element simulation of selective laser melting. Materials and Design, 2018.
11.QC Kong, Y Li*, GD Liu, CJ Li, H Tong, WM Gan, Electrochemical machining for micro holes with high aspect ratio on metal alloys using three electrode PPS in neutral salt solution. Int J Adv Manuf Technol., 2017, 93 (5-8), 1903 -1913, 
12.CJ Li, Y Li*, H Tong, L Zhao, QC Kong,ZQ Wang, EDM pulse power generator and its feasible experiments for drilling film cooling holes, International Journal of Advanced Manufacturing Technology, p1813-1821. (87), 2016.
13.C.J. LI* , Y. LI, X. GAO, C.V. DUONG, Ultra precision machining of Fresnel lens mould by single point diamond turning based on axis B rotation. International Journal of Advanced Manufacturing Technology. p907-913. 77(5), 2015. 
14.李朝将,高兴,李勇*,Duong Cam Vinh,超精密切削机床机电系统设计及Fresnel透镜模具加工实验,光学 精密工程,2015,23(10),p410-416。
15.孔全存,李勇*,刘国栋,李朝将,佟浩, 三电极微细电解加工脉冲电源, 清华大学学报,55(3), p262-272, 2015。
16.李朝将,郭永丰,白基成,卢泽生,基于正交试验法的往复走丝线切割多次切割工艺的研究,电加工与模具, p4-8,2010。

代表性研究项目
1)国家自然科学青年基金项目(51305230);(主持),结题
2)中国博士后特别资助项目(2013T60106);(主持),结题
3)中国博士后面上资助项目(2012M520254);(主持),结题

参与完成国家863计划、国家自然科学基金、省市科研项目11项。

成果及荣誉
2009年度黑龙江省高校科技成果进步一等奖;
2011年度江苏省科技进步三等奖;
2012 年清华大学博士后人才支持计划。
                  
社会职务
机械工程学会高级会员。
International Journal of Precision Engineering and Manufacturing-Green Technology,Journal of Cleaner Production, IEEE Transactions on industrial electronics等国际期刊审稿人。